Bonethane Installation Guide

Use Parfix All Purpose neutral cure in clear as adhesive. Check colour, slightly peel back masking for multiple sheets for consistency if not ordered from same colour batch. You may want to order from same colour batch, this will take two to three work days to turn around. Use packaging as template for cutting. 

Step 1

Before installing Bonethane, coat the wall with a light neutral colour.

Lay Bonethane flat for first 3 hours prior to installation.

Ensure that wall is level and flush forming even flat surface for placement of Bonethane

Use only lead pencil for marking cut outs or cuts; excess can be wiped with cloth.

Step 2

Measure the outside perimeter of the wall, length and height, allowing a 1 to 2mm gap all around.

For example if you: measure 500 height by 500 length, your cut out area should be 498 x 498 (2mm).

It is important that the 1 to 2mm gap is followed to allow Bonethane to expand and contract. Also measure section for cut out(s) i.e. power points, angles etc.